How do I replace the battery in my MC03?Updated 13 hours ago

The MC03 battery is replaceable. Follow the steps below to safely remove the existing battery and install a new one.

Before you start:

Switch off your MC03 completely.
Use the tool supplied with the device.
Use only a replacement battery designed for the Punkt. MC03. (To find out more about how to purchase a new MC03 battery, read our guide here)
Work on a clean, flat surface and keep the screws in a safe place.

1. Remove the back cover

Insert the supplied tool into the notch at the bottom-left of the phone. Gently twist the tool, then slide it along the edge of the device to release the back cover.

Insert the supplied tool into the bottom-left notch of the MC03

Carefully lift and remove the back cover.

Remove the MC03 back cover

2. Remove the internal covers

Remove the five screws securing the internal covers, then carefully lift the covers away.

Location of the five screws inside the MC03

3. Disconnect and remove the battery

Pull the black tab to disconnect the battery, then carefully remove the battery from the phone.

Pull the black tab to disconnect the MC03 battery

4. Install the new battery

Place the new battery into the battery compartment.

Insert the new battery into the MC03

Align the battery connector carefully and press it into place. Then reposition the internal covers.

Align and reconnect the MC03 battery connector

Reinstall and tighten the five screws.

Reinstall and tighten the five MC03 screws

5. Reinstall the back cover

Before closing the phone, make sure that no internal components are loose. Position the back cover correctly and press around its edges until it clicks securely into place all the way around.

Press the MC03 back cover into place

Need help?
If you are unsure about replacing the battery or encounter any difficulty during the process, please contact Punkt. Support before proceeding.

Was this article helpful?

Yes